thermostat for cooling

thermostat for cooling KTC 011 :thermostat (normally open);contact maker for regulating of filter fans and heat exchangers or..

thermostat for cooling

KTC 011 :thermostat (normally open);contact maker for regulating of filter fans and heat exchangers or for switching signal devised when temperature limit had been exceeded.

Large setting range Small size Simple to mount High switching performance

Technical Data

Switch temperature difference	7K (± 4K tolerance)
Sensor element	thermostatic bimetal
Contact type	snap-action contact
Contact resistance	< 10mOhm
Service life	> 100 000 cycles
Max. switching capacity	250VAC, 10 (2) A
	120VAC, 15 (2) A
	DC 30W
EMC	acc. to EN 55014-1-2, EN 61000-3-2, EN 61000-3-3
Connection	2-pole terminal, clamping torque 0.5Nm max.: rigid wire 2.5mm², stranded wire (with wire end ferrule) 1.5mm²
Mounting	clip for 35mm DIN rail, EN50022 (or for exit filter EF 118 Series)
Casing	plastic according to UL94 V-0, light grey
Dimensions	60 x 33 x 43mm
Weight	approx. 40g
Fitting position	variable
Operating/Storage temperature	-20 to +80°C (-4 to +176°F) / -45 to +80°C (-49 to +176°F)
Protection type	IP20

Setting range	Art. No. Contact breaker (NC)	Approvals
0 to +60°C	01140.0-00	VDE
-10 to +50°C	01142.0-00	VDE
+20 to +80°C	01159.0-00	VDE
+32 to +140°F	01140.9-00	UL File No. E164102
+14 to +122°F	01142.9-00	UL File No. E164102
0 to +60°C	01146.9-00	UL File No. E164102

thermostat for cooling